Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
If there are problems during operation of the powder milling machine, press the emergency stop (all the parts of the machine will be stopped).
|
Faults |
Reason |
Shooting |
|
The motor doesn’t work |
1. fuse breaks off 2. contactor doesn’t contact well 3. the circuit is not through |
1. change the fuse 2. check or change it 3. check or change the wiring |
|
Noise |
1. bearing is attrited 2. unbalance of main shaft, movable hammer, fan device |
1. change the bearing 2. do the balance test |
|
Low capacity, uneven powder |
1. movable hammer or liner is attrited 2. tube jam; powder stick on the impeller of the air-lock device 3. filer pockets are broken 4. air leak of the tube 5. sieve is broken or has the jam |
1. change them 2. clean the tube and the air-lock device 3. adjust or change it 4. seal it 5. clean or change it |
January 25, 2024
January 15, 2024
March 05, 2024
August 28, 2023
February 19, 2024
January 14, 2024
January 25, 2024
January 14, 2024
이 업체에게 이메일로 보내기
January 25, 2024
January 15, 2024
March 05, 2024
August 28, 2023
February 19, 2024
January 14, 2024
January 25, 2024
January 14, 2024
질문 보내기
Ms. Susan
전화 번호:86-0510-86184255
Fax:
휴대전화:+8615961650796
이메일:277319138@qq.com
회사 주소:No.8 Dongmeng Road, Dongmeng Technology Zone, Nanzha Town, Jiangyin , Wuxi, Jiangsu
모바일 사이트
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.